Copyright © 2019  Yuhuan Reach Machinery Co., Ltd.

Share: 

ADD:

Chumen Town,Yuhuan CIty,Zhejiang Province, China

PRODUCT LIST

PRODUCTS

DIN Flange Globe Valve

没有此类产品
Messages
Detail

Stainless Steel Flange ends DIN F1 standard Globe Valve PN10~PN100

RST Valve company is a industry valves manufacturer, including Thread & Flange Ball Valves, Gate Valves, Globe Valves, Check Valves, Y Strainers in stainless steel, carbon steel, cast steel, forged steel and alloy steel.

Globe Valve mainly had Thead ends 200WOG Globe Valve, BS1873 Flange ends Globe Valve, DIN F1/F5 Standard Flange Globe Valve, Stainless Steel Flange ends Globe Valve, Carbon Steel Butt Welded Globe Valve, Stainless Steel Bellow Seal Globe Valve, Forged Steel A105/F316 Globe Valve, 800LB/1500LB Forged Steel Flange Globe Valve, Butt Welded CF8M Globe Valve, Pressure Sealed Flange Globe Valve, High Pressure 2500LB Flange Globe Valve, 150LB~900LB WCB Flange ends Globe Valve, Gear Operated Globe Valve, Globe Valve with Pneumatic/Electric Actuator.

Globe valves are typically two-port valves, although three port valves are also produced mostly in straight-flow configuration. Ports are openings in the body for fluid flowing in or out. The two ports may be oriented straight across from each other or anywhere on the body, or oriented at an angle (such as a 90°). Globe valves with ports at such an angle are called angle globe valves. Globe valves are mainly used for corrosive or high viscous fluids which solidify at room temperature. This is because straight valves are designed so that the outlet pipe is in line with the inlet pipe and the fluid has a good chance of staying there in the case of horizontal piping. In the case of angle valves, the outlet pipe is directed towards the bottom. This allows the fluid to drain off. In turn, this prevents clogging and/or corrosion of the valve components over a period of time. A globe valve can also have a body in the shape of a "Y". This will allow the construction of the valve to be straight at the bottom as opposed to the conventional pot type construction (to arrange bottom seat) in case of other valves. This will again allow the fluid to pass through without difficulty and minimizes fluid clogging/corrosion in the long term.

Specifications:

 

Product Name

Cast Steel Flange Ends Globe Valve PN10~PN100 WCB/CF8M

1. Material

SS304/316/304L/316L ( CF8/CF8M/CF3/CF3M), WCB, WCC, LCB,LCC,WC6,WC9, C5,C12, etc

2. Size

2'~36'' ( DN50~DN900)

3. Thread standard

ISO9001 & CE, TS

4. Port

Full Port

5. Working Pressure

PN10/PN16/PN25/PN40/PN64/PN100

6. Connection Ends

RF, RTJ, FF, Butt-welding.

7. Working Temp.

-29~425, or according to customer requirements for different industry.

8. Suitable Medium

Water, Natural Gas, Oil and some corrosive liquid

9. Operated

Gear Operated, Pneumatic Actuator, Electric Actuator.

10. Inspection & Testing

According to API598

Shipment

 

Delivery Time

15~20 Days

Package

Standard Exporting Plywood Case

Shipping Port

Ningbo/Shanghai, China

Shipping Terms

Exw, FOB, CFR, CIF, etc.

Payment Terms

T/T, Western Union, PayPal, etc.

 

30% prepayment, 70% balance paid before shipping or against copy of BL

Country of Origin

Wenzhou city, China

Production Capacity

6000 ton/year

MOQ

10 PCS/size

 

 

Technical Specification:

 

1. Design and Manufacture:EN13709

2. Inspection and Test:ISO 5208EN12266

3. Flanged ends dimension:EN 1092-1DIN2544 PN 25DIN2545 PN40DIN 2546 PN64

4. Butt-welded ends dimension:EN12627

5. Face to face and end to end:DIN 3202 EN 558-1 ISO 5752

6. Pressure-temperature ratings:DIN 2401

 

 

 

Globe Valve Application

Globe valves are primarily used as control valves where throttling or both throttling and shut-off are required. Globe Valves can also be used for on-off service; however, because of design, a pressure drop becomes inherent. This is generally confined to on-off applications where the valve is normally closed and pressure drop is not important when the valve is open. Globe valves are uni-directional valves and normal applications will find the globe valve with the flow and pressure under the disc. GLT cast steel globe valves are commonly made in outside screw and yoke designs with full ports and heavy-duty type discs.

Disc

The valve is normally supplied with the conical plug type disc. The disc rotates freely on the stem and incorporates a differential angle from that on the seat ring. This design provides the maximum assurance of shut off, is less likely to stick in the body seat, and is considered the simplest design for field repair.

Stem

All stem are rotating, rising and designed with integral backseat features which provide an ultimate seal during packing changes.

Packing

The stem packing is designed and arranged to ensure a maximum seal along the stem during operation or while at position, thus allowing for a greater reduction in fugitive emissions. Our packings are made of Graphite(Non-asbestos).

End Connections

Our standard end connection produce valves with:

- Flange end type with Raised Face(RF), Flat Face(FF) or Ring Type Joint(RTJ) that conform to ANSI B16.5.

- Butt-welding ends(BW) that conform to ANSI B16.25.

- Threaded ends(NPT) that conform to ANSI B1.20.1, socket weld ends that conform to NASI B16.11.

- All face to face /end to end dimensions conform to ANSI B16.10

Other special end connections are supplied according to customers requirements.

 

Operator

Standard valves come with manual operator. Gear operation can be installed if required. Other accessories such as actuators, chainwheels, locking device and many others are available to meet customer requirements.

 

Competitive Advantages:

 

² An ISO9001 ,CE certified manufacturer

² GOOD QUALITY

² RESONABLE PRICE

² ON-TIME DELIVERY

² STRICT EXAMINATION

² SINCERE SERVICE

² DURABLE IN USE

² Export experience for many years

² We provide you best solutions to assist you win the market.

 

Part

WCB Series

304 Series

316 Series

Cr-Mo(V) Series

LCB, LCC Series

Body & Bonnet

A216 WCB

A351 CF8
A351 CF3

A351 CF8M
A351 CF3M

A217 WC5
A217 C9
A217 C5

A352 LCB
A352 LCC

Disc

A216 WCB

A351 CF8
A351 CF3

A351 CF8M
A351 CF3M

A217 WC5
A217 C9
A217 C5

A352 LCB
A352 LCC

Stem

A182 F6a

A182 F304
A182 F304L

A182 F316
A182 F316L

A182 F6a

A182 F6a

Seat Ring

A105/A182 F6a

A182 F304
A182 F304L

A182 F316
A182 F316L

A182 F6a

A182 F6a

Sealing Material

Cr13/Cr13
304/304
HF/304
HF/HF
316/316
HF/316
HF/Monel

304/304
HF/304

316/316
HF/316

HF/Cr13
HF/HF

316/316
HF/Monel
HF/316

Backseat

A182 F6a

A182 F304
A182 F304L

A182 F316
A182 316L

A182 F6a

A182 F6a

Yoke Sleeve

A439 D2

A439 D2

A439 D2

A439 D2

A439 D2

Stud

A193 B7

A320 B8

A193 B8

A193 B7

A193 B7

But

A194 2H

A194 8

A193 8M

A194 2H

A194 2H

Packing

Graphite

Gasket

Spiral Wound+Graphite/Ring Joint Metal

Handwheel

Carbon Steel/Ductile Cast Iron

 

Note: All the data should be confirmed with the approved drawings of manufacturer.

 

RST VALVE is looking forward to strengthening cooperation with various sectors of society to create brilliancy together.

 

MADE IN CHINA, FOCUS ON WORLD!

 

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待

Tel: 0086 576 87449065
Fax: 0086 576 87467338
Mob/whatsapp: 0086 13736571023

E-mail: info@reachvalve.com

            444618521@qq.com